320LXP |
Fixed Reach |
320LXPV |
Variable Reach |
|
|
|
|
|
|
|
|
|
|
|
PECO’s unique sensing-coil, face plate design, rugged stainless steel housings, and thermal overload protection translate into long term survivability in hostile manufacturing and filling environments. Full shielding eliminates the possibility of sensor to side rail fringing and “lock-up” when no containers are present. The LX Series’ low profile design permits easy mounting through conveyor side rails. Output activation and can presence or detection are indicated by LED. NPN and PNP or Sink and Source outputs are compatible with PECO, Allen-Bradley, General Electric, Gould, Omron, Texas Instruments, Siemens and most brands of programmable controllers.
|
Technical Specifications
| Input: Red Wire Black Wire |
+10. . . +30 VDC Common (ground) |
| Operating Current: | 35 mA, not including load current |
| Operating Temperature: | 0° to 160°F |
| Fixed Reach: Model 320LXP |
0.75" (steel) 0.50" (aluminum) |
| Variable Reach: Model 320LXPV |
.1”. . . 0.75" (steel) .1”. . . 0.50" (aluminum) |
| Hysteresis: | Approximately 10% of set reach |
| Output: White Wire Green Wire |
Open Collector, current sink, 300 mA Voltage source, +10 to +30 VDC 300mA Note: Voltage source tracks DC input voltage to sensor |
| Circuit Protection: | Input lead reversal Short circuit to ground Short circuit to power Thermal overload |
| Cable Length: | 10 feet |
| LED Indicator: | LED turns “ON” when can is detected |
| Senses Container Sizes: | 202 to 401 |
| Housing Material: | Stainless Steel |
| Dimensions: | 3” wide x 1.5” high x 2.25” deep |
| Mounting: | Two stainless steel studs |
| < Prev | Next > |
|---|