|
DC LOGIC Can Proximity Sensor with On/Off Delays |
|
|
Models 326LXH | Fixed Reach | 326LXHV | Variable Reach |
Features | | | | | | | | - Current Sinking and Voltage Source Output
| - Rugged 304 Stainless Steel Housing and Studs
| | | | | | | | |
The PECO 326 Series of wide field proximity sensors are suitable for the detection of sizes 202 to 704 aluminum or steel cans.
PECO’s unique sensing-coil, faceplate design, rugged stainless steel housings, and thermal overload protection translate into long term survivability in hostile manufacturing and filling environments. Full shielding eliminates the possibility of sensor to side rail fringing and “lock-up” when no cans are present.
This Series’ Independent timers or adjustable ON/OFF time delays expand the capabilities of a programmable controller and enhance sensor performance. Output activation and can presence or detection are indicated by a two-stage LED.
The LX Series’ low profile design permits easy mounting through conveyor side rails.
NPN and PNP or Sink and Source outputs are compatible with PECO,
Allen-Bradley, General Electric, Gould, Omron, Texas Instruments, Siemens
and most brands of programmable controllers. |
Technical Specifications Input:
Red Wire
Black Wire |
+10. . . +30 VDC
Common (ground) | | Operating Current: | 45 mA, not including load current | | Operating Temperature: | 0° to 160°F | Fixed Reach:
Model 326LXH |
1.25" (steel)
0.65" (aluminum) | Variable Reach:
Model 326LXHV |
.1”. . . 1.25" (steel)
.1”. . . 0.65" (aluminum) | | Hysteresis: | Approximately 10% of set reach | Output:
White Wire
Green Wire |
Open Collector, current sink, 300 mA
Voltage source, +10 to +30 VDC 300mA
Note: Voltage source tracks DC input voltage to sensor | Time Delays:
“ON/OFF” Delay |
0.1 to 5.0 sec. (Approximately 0.25 sec/turn) | | Circuit Protection: | Input lead reversal
Short circuit to ground
Short circuit to power
Thermal overload | | Cable Length: | 10 feet | | LED Indicator: | LED blinks as individual cans pass sensor
LED glows when output is energized | | Senses Container Sizes: | 202 to 704 | | Housing Material: | Stainless Steel | | Dimensions: | 5.5” wide x 1.75” high x 2.25” deep | | Mounting: | Two stainless steel studs | 
|