|
DC LOGIC Narrow Profile Can Sensor |
|
|
Model 356LXP
Features
| | | | | | - LED - Can Presence/Output Signal
| - Current Sinking and Voltage Source Output
| - Rugged Stainless Housing and Mounting Studs
| | | | | | |
The PECO Model 356LXP is a narrow profile or “slim line” proximity sensor for steel or aluminum cans that easily mounts between conveyor side rails eliminating the need for rail cutting. The PECO 356LXP is a rugged, fully encapsulated, proximity switch that was designed for the harsh environment of can manufacturing and filling. It is “double protected” by a unique, proprietary encapsulating process against the ingress of moisture from coolants, lubricants and frequent wash downs. The 356LXP is short circuit and thermal overload protected to eliminate the most common cause of sensor failure and fully shielded to eliminate “lock up” from rail fringing when no cans are present. NPN and PNP outputs (sink and source) are standard and compatible with most programmable controllers like Allen-Bradley, General Electric, Gould, Omron, Texas Instruments, Siemens, and others. An indicator LED signals can presence or detection.
|
Technical Specifications
Input:
Red Wire
Black Wire |
+10. . . +30 VDC
Common (ground) | | Operating Current: | 35 mA, not including load current | | Operating Temperature: | 0° to 160°F | | Fixed Reach: | 1" (steel)
.50" (aluminum) | | Hysteresis: | Approximately 10% of set reach | Output:
White Wire
Green Wire |
Open Collector, current sink, 300 mA
Voltage source, +10 to +30 VDC 300mA
Note: Voltage source tracks DC input
voltage to sensor | | Circuit Protection: | Input protected against power lead reversal
Sink and source output - built - in
protection diodes: short circuit to ground,
short circuit to power, and thermal
protection | | Cable Length: | 10 feet, four conductor #22 AWG | | LED Indicator: | LED turns “ON” when can is detected | | Senses Container Sizes: | 202 to 704 | | Housing Material: | Stainless Steel | | Dimensions: | 5.5" wide x 1.38" high x 2.25" deep | | Mounting: | Two stainless steel studs | | Hardware: | Stainless "L" bracket and mounting
hardware included |
|