|
AC Logic Can Proximity with Sink/Source Output |
|
|
|
 Model
Features - Fixed Reach
- Fully Shielded
- Can Presence/Output LED
- Rugged 304 Stainless Steel Housing and Studs
- Temperature Compensated
- Short Circuit Protected
- Response Time under 2ms
- Low Profile Design
- 30 to 150 Volt AC Input
The PECO 320LXPAC is a fixed reach proximity sensor, suitable for detection of sizes 202 to 401aluminum or steel cans. Can presence and sensor output is indicated by an activated LED.
PECO’s unique sensing-coil, face plate design, rugged stainless steel housings, thermal overload and short circuit protection translate into long term survivability in hostile manufacturing and filling environments. Full shielding eliminates the possibility of sensor to side rail fringing and “lock-up” when no containers are present.
The LX Series’ low profile design permits easy mounting through conveyor
side rails, and these rugged, versatile sensors are compatible with PECO, Allen-Bradley, General Electric, Gould, Omron, Texas Instruments, Siemens
and most brands of programmable controllers.
Technical Specifications | Input: | 30. . . 150 VAC | | Load Current: | 5 to 300 mA | | Leakage Current: | 900 microamps maximum | | Operating Temperature: | 0° to 160°F | | Fixed Reach: | 0.75" (steel)
0.50" (aluminum) | | Switching Frequency: | 40 Hz | | Hysteresis: | Approximately 10% of set reach | | Output: | Normally open switch | | Circuit Protection: | Output short circuit protected Sensor latches “OFF” until AC power is recycled | | Cable Connection: | Brad Harrison connector P/N 41011
Brad Harrison mating cable P/N 40902
Standard length - 6 feet | | LED Indicator: | LED turns “ON” when can is detected | | Senses Container Sizes: | 202 to 401 | | Housing Material: | Stainless Steel | | Dimensions: | 3” wide x 1.5” high x 2.25” deep | | Mounting: | Two stainless steel studs |
Standard Equipment
Engineering Drawings 
|