Models

• HM On/Off Delay
  PM On/Off
  DPM Dual On/Off
  MM Motion On/Off Delay

Features

Versatile
Economical
Easy Installation
Simple to Operate
Sensitivity Control for Inductive Proximity Sensors

The PECO On/Off Control Modules are versatile enough to control a wide variety of can line applications. Accepting input from PECO analog or logic sensors that monitor production and conveyance, these modules control or start and stop presses, conveyors, motors and other machinery to assure efficient running production lines. 

PECO Control Modules provide distributed control solutions to basic line operations. Modules can be used alone or in a systems approach, depending on the control required, for applications ranging from a single machine to total production control. The HM Module provides timed on/off output, the MM Module provides stopped motion output, and the PM and DPM Modules provide immediate on/off output. 

All modules have "bright" output indicator lamps and a calibrated control knob for quick and easy sensitivity or reach adjustment. Separate back plates are included with all modules with clearly marked terminals for wiring sensors, outputs and power which facilitates easy set-up and allows wiring to remain in place during changeover.

Technical Specifications

• Circuit Response Time:  ON: .26 ms OFF: 1.6ms
  Housing:  Painted Steel
  Operating Temperature: 0ºF to 140ºF
  Output:  12 VDC, Unfiltered @ 300 mA max
  Power Requirements:   120 VAC, 60 Hz or 230 VAC, 50 Hz (specify)
  Time Delay Range:  ON: .05 to 10 seconds OFF: .10 to 10 seconds
  Time Delay Repeatability:  0.1% @ 32°F to 140°F

Standard Equipment

• 1 Module with Back Plate
  Installation and Operating Instructions

Engineering Drawings